学术动态
当前位置: 学院首页 > 学术动态 > 正文

博士生赵一鹤、黄琳雅参加国际会议回国报告

发布时间:2019-07-08 点击数:


汇报题目:Transducer 2019 --EURO SENSORS XXXIII (The 20th International Conference on Solid-State Sensors, Actuators and Microsystems) 参会报告


汇报时间:2019714日(星期日) 19:00

汇报地点:兴庆校区出版大厦第一会议室


汇报人:赵一鹤、黄琳雅

会议名称:The 20th International Conference on Solid-State Sensors, Actuators and Microsystems

会议时间:23-27 June 2019

会议地点:Berlin, Germany


会议简介:Every six years, when Transducers is held in Europe, it is organized jointly with EUROSENSORS. Together this event forms the world's premiere conference in Microsensors & Microactuators, integrated micro and nano systems and MEMS/NEMS attracting more than 1,000 attendees from academia, research institutions, government agencies and industries to exchange the latest advances in the field.


The major areas of activity in the development of Sensor, Actuators and Transducers solicited and expected at this conference include but are not limited to:

Mechanical/Physical Sensors and Microsystems

Materials, Fabrication, and Packaging Technologies

Nanoscale Devices and Nanomaterials

Transducers with Soft, Flexible or Composite Materials

Chemical and Environmental Sensors and Microsystems

Bio-Sensors and Bio-Microsystems

Medical Microsystems

Microfluidics (non-bio)

Energy and Power MEMS

Acoustic Microdevices and RF MEMS

Integrated Photonics and Optical MEMS


参加论文信息

TitleDENSITY MEASUREMENT PERFORMANCE IN FLOWING LIQUID USING MICROCANTILEVER-BASED RESONATORS UNDER BENDING AND TORSION VIBRATIONS

AuthorLinya Huang, Libo Zhao, Yingjie Hu, Hongyan Wang, Dejiang Lu, Xudong Fang, Guoxi Luo, Chenying Wang, Ping Yang, Weixuan Jing, Yulong Zhao, and Zhuangde Jiang.

AbstractThe performance of microcantilever-based resonator working under different operation modes is analyzed in fluid density determination at different flow velocities. A setup is designed to control the liquid flow velocity along normal and tangential directions in the range of 0-4.37 m/s. Microcantilever-based resonators are fabricated with different lengths, which are excited to vibrate under 1st bending and 2nd torsion modes. The experimental results show that the normal flow velocity plays a leading role to impair the density measuring accuracy. The microcantilever-based resonator with shorter length and in higher order vibration mode is demonstrated to have a better measurement performance in flowing liquids.


TitleLUMPED ELEMENT MODEL FOR CMUTS-BASED BIOCHEMICAL RESONANT SENSOR

AuthorYihe Zhao, Libo Zhao, Zhikang Li, Jie Li, Tingzhong Xu, Shuaishuai Guo, Zichen Liu,

Guoxi Luo, Jiuhong Wang, Jing Li, Xiangyang Zhou, Hongyan Wang, Yongshun Wu, Yulong Zhao, and Zhuangde Jiang.

AbstractLumped element model (LEM) for resonant chemical sensors based on the capacitive micromachined ultrasonic transducers (CMUTs) was developed and analyzed with electrical characterization. The CMUTs chip were functionalized with the electrospinning technology. Two Butterworth Van-Dyke (BvD) models for functionalized CMUTs were proposed and analyzed with different DC voltages. Considering the electrical phase with parasitic capacitance, the modified BvD model can be used to illustrate more comprehensive features for both mechanical impedance and phase properties. The parallel capacitance was measured accurately using an impedance analyzer, and the quality factor was calculated based on the proposed model under different DC voltages. These models will provide important theoretical basis for CMUTs-based chemical sensors to further electrical analysis and oscillator design.



地址:陕西省西安市咸宁西路28号 邮编:710049
           版权所有:西安交通大学机械学院     站点维护: 网络信息中心 陕ICP备06008037号