应我院李涤尘教授邀请，德国克劳斯塔尔工业大学（Clausthal University of Technology）Ziegmann教授到西安交通大学访问，并为我校师生作纤维增强复合材料方面的学术报告。

题目：纤维加强复合材料在航空领域的应用与研究进展

时间：9月6日（周二）下午3：00

地点：机械工程学院第三会议室

报告摘要：

纤维加强复合材料以其高效的机械性能质量比在航空领域得到了广泛的应用。针对目前纤维加强复合材料在航空领域相关的材料制备，成型工艺及成型装备的研究热点与发展趋势，报告进行了全面的介绍，并将以欧洲空中客车飞机制造公司的实际生产产品进行详细深入的剖析与讲解。

Ziegmann教授简历：Prof. Dr. Gerhard Ziegmann Institute of Polymer Materials and Plastics Engineering, Clausthal University of Technology, Germany.Prof. Gerhard Ziegmann studied mechanical engineering with a focus on plastics technology at the RWTH Aachen University. After finishing his studies in 1974, he was a scientific coworker at the Institute of Plastics Processing (IKV) at the RWTH Aachen University under the guidance of Prof. Menges. There he received his doctorate with the title of “Temperature Resistant Plastic Materials – Manufacturing, Structure and Properties for Selected Polymers.”

After completing his doctorate he went on to work at Dornier, Friedrichshafen, where Dr. Ziegmann developed new composite systems for aircraft construction as well as novel construction methods for the DO 228, DO 328 and the Airbus A320. Furthermore, he implemented a material qualification system. Having worked at Dornier for six years, he became the chief managing engineer for the department of aramid and carbon fibre applications at AKZO in Wuppertal. During that time, these new fibre systems were successfully qualified and used by various aircraft companies in different programs. Additionally, the company’s application laboratory was audited by different aircraft manufacturers on several occasions and accepted as a qualified laboratory.

In 1990 Dr. Ziegmann took employment at the ETH Zürich where he established the construction laboratory for new lightweight concept materials at the Institute of Construction and Construction Methods (IKB) under the guidance of Prof. Flemming.

Dr. Ziegmann was granted his professorship at the Technical University of Clausthal in plastics engineering in 1998. There he founded the Institute of Polymer Materials and Plastics Engineering (PuK) and established the course of studies “Plastic Engineering” in the department of Natural and Material Science.

Dr. Ziegmann is a member of the executive board of both the CZM (Clausthal Centre of Material Technology) and the ZeMPro (Centre of Microproduction e.V.).

His Granted Projects are financed by various foundations (DFG, AiF, BMBF, FNR) and industry companies (Airbus, VW, Bosch, Siemens etc.) over 10 million Euros.

Ziegmann教授主要研究方向：

- Processing of highly filled thermoplastics (compounding, rheology, injection moulding, multi-component injection moulding)

- Micro injection moulding (tooling conception, design of weld lines)

- Processing technologies for composite materials with natural and high performance fibres (filament winding, press technique, autoclave technology, diaphragm technique, Liquid-Composite-Moulding technologies (LCM))

- Natural fibre systems (modification/functionalization of natural fibres, fibre-matrix coupling)

- Modelling and simulation of flow processes (reaction kinetics, permeability, rheology)

- Characterization of materials (mechanical, physical, thermal and electrical properties of material systems)

欢迎有兴趣的师生届时听讲座，研究生记学分。

机械工程学院

2011.9.2